ENGLISH  |  JAPANESE 
 
 
Phone:+0086-512-51910068
Cell:+0086-18900616086
WeChat:18900616086
QQ:1021308596
E-mail:el-longshow@hotmail.com
 
 You are here >> All products >> Thin Film Sensor >> Gas Sensor >> Rdb223 digital pyroelectric sensor
 
Product Code£º
Rdb223 digital pyroelectric sensor
Specifications£º
   
 
¡¡¡¡¡¡
 

Rdb223 digital pyroelectric sensor

 


Product catalog Download

 

product details

Rdb223 digital pyroelectric sensor is an integrated design of the sensitive element and signal processing chip of the traditional pyroelectric sensor. The sensitive element and IC chip are integrated and packaged into the sensor shield. The sensitive element transmits the infrared signal generated by human body movement to a high-precision digital intelligent processing chip for processing by differential input. The signal processing is completed and the transmission is completed The sensor outputs digital signal directly, which is convenient to use.

 

Sensor features

1. High precision ad signal processing;

 

2. Differential signal input mode, strong anti-interference ability;

 

3. Wide voltage power supply 1.5 ~ 4.5V, low power consumption;

 

4. Digital TTL signal output.

 

Main applications

/ / security products

 

The human body induction toy

 

The human body induction lamps, switches and household appliances

 

Industrial automation control

 

Smart home

 

The Internet of things terminal

 

Smart home appliances, etc

 

Technical index

1. Limit parameters

 

Parameter symbol minimum maximum unit remarks

Supply voltage VDD - 0.3 4.5 V 25 ° C

Storage temperature: TST - 40 ? 125 ?

 


2. Working conditions (t = 25 ?)

 

Parameter symbol minimum typical maximum unit remarks

Working conditions

Working voltage VDD 1.5 3.0 4.5 V power supply mode

Working current IDD 10 UA 10uA

@ 3V@25 Degree C

Sensitivity threshold vsens 104 UV

Working temperature: WST - 25.85 ?

output

The output driving current is Irel - 5 5 mA

Blocking time: 2.0 s

The delay time is ontime 1.0 s

Oscillators and filters

The cut-off frequency of low-pass filter is 7 Hz

Cut off frequency of high pass filter is 0.4 Hz

Chip oscillator frequency fclk 32 kHz

Chip oscillator error fclk_ Err -1000 1000 ppm/K -20~80°C

Note: product parameters are subject to change without prior notice

Related sensor information

Thermopile sensors can only be used on forehead temperature guns? You're too out!

Double eleven plan to buy air purifier? Good at these four indicators to decide!

Air quality sensor: what is the difference between indoor and outdoor monitoring indicators?

From November 1, 2020, the national standard on ozone disinfection will be formally implemented

Product recommendation | electrochemical carbon monoxide module ze15-co

Read the application scenarios of gas sensors

Application of ammonia and hydrogen sulfide sensors in detection of malodorous gas alarm

Function of gas sensor in helium control of diving equipment

What are the working principle, advantages and disadvantages of thermal conductivity gas sensor?

Four mandatory national standards for combustible gas detectors to be implemented in November

Related products

Rd-624 pyroelectric infrared sensor

Rd-624 pyroelectric infrared sensor

Rd-623 pyroelectric infrared sensor

Rd-623 pyroelectric infrared sensor

Spherical infrared induction lens Fresnel lens

Spherical infrared induction lens | Fresnel

Planar infrared induction lens | Fresnel lens

Planar infrared induction lens | Fresnel

  • On a product£º Rd-623 pyroelectric infrared sensor

  • Next product£º Application principle of pyroelectric infrared sensor in modern smart home
  • Hits£º1  Entry Time£º11/13/2020 ¡¾Print this page¡¿ ¡¾Close¡¿
    Copyright: Suzhou Long-Show Photoelectric Technology Inc. Tel :86-512 -51910068
    Pressure and Force Measurement_Thin film Pressure Sensor_Force Sensor_thin film force sensor_Pressure
    Distribution_Dental Occlusal Analysis_Body Pressure Measurement System_Pressure Mapping